Knowledgebase

What is the ATM ?

Asynchronous transfer mode. A transmission protocol that segments user traffic into small, fixed-size units called cells, which are transmitted to their destination, where they are reassembled into the original traffic. During transmission, cells from different users may be intermixed asynchronously to maximize utilization of network resources.

International sandard for cell relay in which multiple service types (such as voice, video, or data) are conveyed in fixed-length 53-byte (5 bytes for the address header and 48 bytes for the data) cells. Fixed-length cells allow cell processing to occur in hardware, thereby reducing transit delays.

The technology was designed for the high-speed transmission of all forms of media from basic graphics to full-motion video. Because the cells are so small, ATM equipment can transmit large amounts of data over a single connection while ensuring that no single transmission takes up all the bandwidth. It also allows Internet Service Providers (ISPs) to assign limited bandwidth to each customer.

ATM creates a fixed channel, or route, between two points whenever data transfer begins. This differs from TCP/IP, in which messages are divided into packets and each packet can take a different route from source to destination. This difference makes it easier to track and bill data usage across an ATM network, but it makes it less adaptable to sudden surges in network traffic.

When purchasing ATM service, you generally have a choice of four different types of service:

* constant bit rate (CBR): specifies a fixed bit rate so that data is sent in a steady stream. This is analogous to a leased line.
* variable bit rate (VBR): provides a specified throughput capacity but data is not sent evenly. This is a popular choice for voice and videoconferencing data.
* available bit rate (ABR): provides a guaranteed minimum capacity but allows data to be bursted at higher capacities when the network is free.
* unspecified bit rate (UBR): does not guarantee any throughput levels. This is used for applications, such as file transfer, that can tolerate delays.

ATM is designed to take advantage of high-speed transmission media such as E3, SONET, and T3.

Add to Favourites

Print this Article